How to disassemble and assemble the knife head of ox hairdresser
The method of disassembling and assembling the knife head of the hair clipper is as follows: hold the electric push shear in the front of both hands, press the knife head downward with the thumbs of both hands, and then unload. Hold the electric push and cut back with both hands, which will replace the clasp at the bottom of the knife head in the space of the knife head.
The first thing to pay attention to is that the power supply must be cut off. In order to prevent accidentally touching the switch while removing the knife head and turning on the switch to accidentally injure yourself, the power supply must be cut off before removing the knife head.
Hairdressers are mainly divided into wired electric push shears and rechargeable electric push shears, and the knife heads of these two kinds of hair clippers are disassembled and assembled in different ways.
Disconnect the power supply. When disassembling the knife head, pay attention to the position of the hand, both thumbs must press both ends of the knife head to balance the force, otherwise it is easy to press the knife head or even hurt yourself. Follow the steps above and gently push your thumbs forward to hear a click to make sure the knife head is open.
First twist the back cover screw of the razor, insert the flat head screwdriver along the edge and cut it to the middle of the side, you can see the clasp at the opening, insert it with a screwdriver, pry up, and the other side is the same as above. Secondly, after opening the back cover, you can see a small motor, a PCB board, as well as a power supply and charging port.
How to disassemble and assemble the baby hair clipper? When installing the knife head, first insert the positioning bar at the end of the knife head into the positioning slot of the clipper, and then press down the tool head, which can be installed.
Philips qc5130 how to remove the knife head video?
First of all, the front of the hair clipper is facing the person who is disassembling, otherwise the knife head cannot be removed. Then press down on both ends of the knife with both hands. Keep pressing your hands down on the head of the knife until you hear the sound of a click, and you can let go.
The procedure for removing the Philips razor is as follows: remove the decorative shell outside with a screwdriver, and there is a layer of translucent plastic shell inside, which can be removed directly. The motor shaft has two screw holes, but only one screw is outside. When assembling, the transmission gear is first fixed with the motor and then sealed with glue injection.
Open the head part of the razor, unscrew the two screws located in the stubble bin with a screwdriver of the right size, and the head part can be removed.
Remove the razor head from the razor head bracket and throw it away. And put the new razor head on the bracket. Then place the fixing ring on the razor head and rotate clockwise to reinstall the fixing ring. Replace the razor head bracket back into the razor head assembly (you can hear a "click").
Question 3: Philips razor head disassembly map how to disassemble Philips razor head generally operate according to the instructions, after closing the razor, pull the razor head bracket away from the bottom of the razor head part. Replace the new razor head bracket back to the bottom of the razor head assembly (you can hear a "click").
Open the buckles on both sides, remove the upper cover, and pick up the knife net directly.
How to disassemble rechargeable electric push shears
1. The way to disassemble the fuselage with electric push shears: one thing to pay attention to is to cut off the power supply. In order to prevent accidentally touching the switch when removing the knife head and turning on the switch to accidentally hurt yourself, the power supply must be cut off before removing the knife head. Pay attention to the position of the hand when removing the tool head.
2. If this one of the whole body wants to be disassembled, it has a screw at the back. Unscrew this screw for it, so it can be disassembled again, otherwise it won't be removed.
3. Remove the back screw first, then remove the knife head, there are two screws inside and then use a knife to pry open the outer package. Then remove the screws one by one and you can find the battery.
