The lift chair can't be lifted or lowered. How can it be repaired?
The lift chair can not be repaired, as follows: due to the damage of its lifting rod, it needs to be reinstalled. First stand the lift upside down on the ground, disassemble its bottom, then smash it along its edge with a hammer, break it, or break it if it cannot be broken.
If it is the first two cases, we have no choice but to find a businessman or manufacturer to repair it.
To realize the rise and fall of the seat plate, in addition, a lifting positioning device is set up between the bracket and the foot of the chair, and there are generally three kinds of adjustment mechanisms that first adjust the handle and connect.
Due to the damage of its lifting rod, it needs to be reinstalled. First stand the lift upside down on the ground, disassemble its bottom, then smash it along its edge with a hammer, break it, or break it if it cannot be broken. Then remove the base and remove both the top and the hydraulic support with a hammer.
What if the lift chair can't come up?
Someone in the seat cannot get up under pressure, so the seat should be empty when rising, and the weight should be carried when falling. If it is the first two cases, we have no choice but to find a businessman or manufacturer to repair it.
Due to the damage of its lifting rod, it needs to be reinstalled. First stand the lift upside down on the ground, disassemble its bottom, then smash it along its edge with a hammer, break it, or break it if it cannot be broken. Then remove the base and remove both the top and the hydraulic support with a hammer.
Remove the existing cylinder and put it on the cylinder tube clamp, open it, and loosen the cylinder until it is easy to fall off. Be careful not to pull by force, or other parts of the chair may be damaged. Install new cylinders and buy new cylinders. Make sure the appropriate replacement is selected.
Generally, there are three kinds of adjusting mechanism which adjust the handle and connection first. If there is damage, it may be seven, ah, if it is too bad, there is an air leak. Once again, someone is sitting on it. When you can't get up, you have to sit empty, and when you drop, you have to bear a heavy load. If it is the first two cases, you can only find the manufacturer for maintenance.
The lift chair can not be repaired, as follows: due to the damage of its lifting rod, it needs to be reinstalled. First stand the lift upside down on the ground, disassemble its bottom, then smash it along its edge with a hammer, break it, or break it if it cannot be broken.
Can not be lowered on the swivel chair, generally due to problems with the lifting device, such as the adjustment handle and the connecting adjustment mechanism or the air pressure rod. When repairing, you need to put the swivel chair down on the plane, then use a screwdriver to remove the faulty parts, and then replace them with suitable new accessories.
What if the lifting chair can't go up?
If it is the first two cases, we have no choice but to find a businessman or manufacturer to repair it.
The lift chair can't go up and down. It may be caused by air leakage in the cylinder of the elevator. You can try dropping one or two drops of oil around the bleed button at the top of the cylinder to increase the tightness. If it doesn't work, there's nothing you can do about it. it can't be taken apart, and the spring inside will rise by itself.
Remove the existing cylinder and put it on the cylinder tube clamp, open it, and loosen the cylinder until it is easy to fall off. Be careful not to pull by force, or other parts of the chair may be damaged. Install new cylinders and buy new cylinders. Make sure the appropriate replacement is selected.
To realize the rise and fall of the seat plate, in addition, a lifting positioning device is set up between the bracket and the foot of the chair, and there are generally three kinds of adjustment mechanisms that first adjust the handle and connect.
Users can not be repaired personally, and professional maintenance is needed. The seat plate of the lift chair can be used for lifting, so that the lift chair can be freely adjusted according to different height and age, and can also be used in different ways according to different sitting posture and standing posture.
In general, the screw and nut are not easy to break, it may be the place where the nut or screw is loosened, just find the loose part and fasten it. Ask professionals to repair it. The working principle of the lift chair: pressure, mechanical and air pressure.
