Is it feasible to buy your own barber and get your own haircut?
You just fix the bangs or make do with the left and right sides, otherwise it will be super inconvenient for you to cut the back of your head, and it will take you a lot longer to use your own hairdresser in order not to trim your haircut. If you can find a relative or friend with passable skills, it is more cost-effective to buy a hairdresser.
Hello, give your own haircut, only limited to men, women's hair had better ask for help, to avoid causing messy hair shape.
It is OK to shave your head, because you don't need too much skill. If you shave yourself, you must pay attention to not touching the ear in the ear position, and be sure to slow down a bit. Because the back of the hair can not be seen, it is better to clean it slowly.
If you give yourself a haircut, you must first have experience in haircutting. Only with this skill can you give yourself a haircut.
Go to the shop to get a haircut. It's troublesome to cut your own hair. A little carelessness will make it long and short here and there.
Can you cut your own hair if you buy a hairdresser?
1. Comb all your hair forward first. Long hair on the forehead completely tied into a ponytail, remember to tie the bangs forward on the forehead. Then measure the required length and cut it with a knife to make the fracture as neat as possible. Untie the rubber band and trim your hair a little.
2. It is OK to shave your head, because you don't need too much skill. If you shave yourself, you must pay attention to not touching the ear in the ear position, and be sure to slow down a bit. Because the back of the hair can not be seen, it is better to clean it slowly.
Hello, give your own haircut, only for men, women's hair had better ask for help, to avoid causing messy hair shape.
4. Of course, but people who do not have the technology or have not used faders should use them carefully.
5. You just fix the bangs or the left and right sides are all right, otherwise it will be super inconvenient for you to cut the back of your head, and it will take you a lot longer to use your own hairdresser in order not to trim your haircut. If you can find a relative or friend with passable skills, it is more cost-effective to buy a hairdresser.
6. First of all, charge the electric hair cutter. According to how long hair you want to keep, choose a suitable limit comb, generally divided into 3mm, 6mm, 9mm, 12mm, male students haircut generally choose 9mm.
How to shave your head with a hairdresser
Be sure to lubricate the hairdresser before pushing and cutting your hair to avoid getting stuck and causing pain. It is best to use a comb as a limit when trimming sideburns to help repair sideburns and avoid cutting them too short.
Use electric pushers to build the hair above the ear to expose the scalp. In general, the hair at the top of the flat haircut will be slightly longer, and the hair at the back of the head will be made with electric pushers in a shape consistent with the length on both sides. Make a slightly longer styling of the hair at the top and use an electric pusher to shorten the top part of the hair.
Just go bald and put your head on the skin. The hairdresser should be cleaned frequently and dripped with lubricating oil for maintenance, otherwise the knife head will rust and clip hair. Electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil.
How to use a hairdresser to get a haircut or a direct haircut?
Just go bald and put your head on the skin. The hairdresser should be cleaned frequently and dripped with lubricating oil for maintenance, otherwise the knife head will rust and clip hair. Electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil.
Generally shave the head is: 1. The cooperation of the hands and eyes: control the outline of the hairstyle with thought, the comb of the left hand with the eyes, and the scissors with the right hand. 2. Cooperation between left and right hands: the comb of the left hand should be slow and steady, and the scissors of the right hand should be fast and accurate. 3. The order of pruning: first the top, then the side, then the perimeter.
Use electric pushers to build the hair above the ear to expose the scalp. In general, the hair at the top of the flat haircut will be slightly longer, and the hair at the back of the head will be made with electric pushers in a shape consistent with the length on both sides. Make a slightly longer styling of the hair at the top and use an electric pusher to shorten the top part of the hair.
Steps to shave your head: first of all, in terms of tools, it is recommended that you choose Gillette's frontal speed 3, which is clean and not easy to scratch the scalp. As for the length of the hair, if it is more than one centimeter, push it off with a fader before shaving, otherwise it will hurt and it will be very difficult to shave.
Tips for using an electric barber to cut your own hair, or precautions?
1. First of all, it is necessary to choose a suitable limit comb, which is generally divided into 3mm, 6mm, 9mm, 12mm and longer ones. First try a longer limit comb so that remedial measures can be taken after the mistake. The order can be from both sides to the middle and then to the back. Push it evenly. Walk the sideburns around your ears from the back to the front.
2. Wash your hair first (this will give you a better sense of layering). The hair dryer will blow the hair half dry and adjust the gear you need. it is recommended by the novice to default (the electric haircut is pushed to the haircut for the longest) (the shorter the haircut is, the shorter the hair is).
3. After charging, the electric push scissors head can be smeared with a little special lubricating oil to protect the knife head and reduce the noise when the knife head is working. According to the length of the hair you want to keep, choose a corresponding positioning comb to fit on the head of the electric push scissors. The positioning comb has several specifications of 3~18MM.
4, electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil. There are two types of hair clipper lubricants: mineral oil and synthetic oil. Complete oil has excellent performance, clear and transparent, durable, tasteless, and does not thicken in winter.
5. If you want two hands to work together, you need to cooperate with both hands at the same time, try to keep the electric push without pressing the haircut comb and move on a plane. The hairdressing comb needs to have a contact surface with the hair. look carefully at the neat hair on the comb before you can push it over.
