Chengdu Superman hairdresser fell to the ground, the cover of the machine fell up and down a Fengzi can not close together, what to do?
1. Hello! If the hairdresser is broken, you can contact the manufacturer to see if it can be repaired, and if it really doesn't work, buy a new one. You can send it back and let them fix it for you.
Common faults of easy-to-cut hair cutter
1. 1: the knife head does not turn or rotates abnormally; 2: the hair clip troubleshooting: the hair clipper should be cleaned frequently and dripped into the lubricating oil for maintenance, otherwise the knife head will rust and clip the hair. Electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil.
2. Different product designs are different. Generally speaking, the charging indicator light is always on during the charging process, and there are flashing lights, but when the charge is saturated, it does not flash, depending on which category your product belongs to. If the connection of the charger is not in good contact, it will also flash.
3. Because the hairdresser belongs to the trigger switch setting and has the function of bouncing, it will not work if it is pressed too fast, or if the force is uneven, so be sure to press the right button when pressing the switch.
4. Maintenance of hairdresser: maintenance of knife head: children's hair scissors used at home are basically waterproof. After shaving the baby's head, remove the knife head, wipe off the debris along the direction of the blade with a small brush attached to the knife head, and then wash the head with water. Be sure to dry it after cleaning to prevent rust.
5. It should be the fault of the charger. The common fault of the hair clipper charger is that after the current-limiting resistor is burnt out, the charger will flash alternately when the traffic light is charged and the charger fan will not turn. Changing a charger can solve the problem.
If the hairdresser falls, there will be no sound and will not move.
Suitable for rational consumers: for many workers in first-tier cities, as the cost of renting stores is getting higher and higher, the cost of consumers continues to soar at a single time, and hairdressers can easily save money to run the house.
Pay attention to the use of limit combs. Limited combs are useful for novice haircuts to avoid haircuts of different lengths. Pay attention to using the maximum limiter as far as possible, and try to cut your hair as long as possible, so that if you don't get a good haircut, you still have a chance to fix it. Try to avoid using it while charging.
The hair clipper should be cleaned frequently and maintained with lubricating oil, otherwise the knife head will rust and clip your hair. Electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil.
How can I fix the knife head of the electric push shears if it doesn't turn?
Lack of power. Charge. The electric push shearing battery will stop automatically when it is fully charged with a protective device, and the battery will not break down after being charged for 24 hours.
Add lubricating oil to the blade. Change the blade. The use of electric fader: charging time. Just bought the electric hairdresser, you should pay attention to charge more than 12 hours, which is good for the battery. And if you do not use the barber for more than a month, you should charge the charger for more than 12 hours when you use it again.
This is an AC motor type electric push shear. It's heavy. The white one is the drive rod. I don't know if the motor works when you turn it on. If the motor works but the drive rod does not work, it is not installed or a small part is damaged.
This is I think you see if it is because the wire inside is broken, if there is no normal wire line inside, if there is a problem, then it still cannot carry out a normal activity, and it is a kind of fault.
