What does it mean to put 0.8mm and 2.0mm on electric push scissors?
1, .8mm and 0mm are electric fader positioning combs, which can be used as long as you need to keep your hair.
2. 8-0 represents the length of the hair, in millimeters. The smaller the number, the shorter the cut, and the larger the number, the longer the cut. So you should choose small numbers.
3. The 084 and 0 above the pet electric fader refer to. The length of the hair pushed out by the fader is 0.8 mm if 0.8. Four is four millimeters.
4. The hairdresser 0.8-0 indicates the size of the hair that can be cut, and the inch head is generally 0.8. Men's short hair has plate inch, round inch, warhead, aircraft head, middle part, etc., while women's short hair has middle wave head, air bangs wave head, Japanese fresh short hair and so on.
5, .8mm and 0mm are electric fader positioning combs, which can be used as long as you need to keep your hair. The limit comb is also a good auxiliary tool in the haircut process.
6. 8 mm and 0 mm are electric fader calipers, which can be adjusted and used as needed. Calipers, also known as positioning combs, generally have 12mm calipers of 9mm, 6mm and 3mm in size, which can be placed on the head of a knife to cut hair of different sizes. Caliper hairstyles are available in 3mm, 6mm, 9mm and 12mm specifications, with the longest being 12mm.
.. .2, cut off the remaining 1 prime 2 for the second time. How long is the rest after cutting it for the sixth time?
After the first cut, there is 1 stroke 2 left, the second time 1 stroke 2 × 1 hand 2 = (1 hand 2) ^ 2, and the third time (1 hand 2) ^ 3. The sixth time left (1 stroke 2) ^ 6 inch 1 stroke 64 1 meters x 1 pound 64 meters 1 pound 1 100 meters so the last remaining rope is longer than 1 centimeter.
Solution: 2x (1amp 2) ^ 6 = 1qq32m is available according to the question | masking 3 | = 0, (nMel 4) ^ 2 0, that is, masking Muth3 ^ n4, so (- m) ^ n = 3 ^ 4 = 81 if you don't understand, please continue to ask.
The first time you truncate 1 amp 2, there is 1 Accord 2 left, and the second time you truncate the remaining 1 Compact 2, then there is 1/2 of 1 Accord 2, that is, 1/4. And so on, after 6 times of cutting, there is 3 × 1 beat 2 × 1 hand 2 × 1 hand 3x64 meters. Thank you.
The length of the rope left after the second cut is 1pm, and the length of the rope left by the third cut is 1pm 8m. By analogy, the law can be found that the length of the remaining rope after the Nth cut is 1 / 2 ^ N meters, that is, 1 divided by 2 N meters, and the length of the remaining rope is 1 / 2 ^ 6 meters after the 6th cut.
The rest of the rope is 42m 2m 8m long, so the rope was 2m 8m long. As mentioned above, the process is as above. Please understand.
Also, because the second cut is 1/2 of the first one. The third cut is 1/2 of the second one.
Push scissors do not shave the caliper against the scalp. How long is it?
1. More than one centimeter is very short. Put the limit comb directly on the knife head of the haircut, and then comb the hair, which can prevent injury to the scalp, make the haircut safer, and will not make the hair bald. Barber scissors, also known as electric push scissors, are divided into wired and wireless categories.
2. Caliper hairstyles are available in 3mm, 6mm, 9mm and 12mm specifications, with the longest being 12mm. The caliper head refers to the hairstyle that is consistent in length, as if it had been measured with a caliper.
3. In fact, calipers are round inches, but there are still warheads and plate inches (flat heads), but they are too out of date and ignored. To be honest, an inch is a little out of date. If you don't have bangs, you can have a plane head or other European and American hairstyles. If you have bangs, I'll help you with the picture. I need you to ask.
4, .8mm and 0mm are electric fader positioning combs, which can be used as long as you need to keep your hair. The limit comb is also a good auxiliary tool in the haircut process. First of all, you should choose a suitable limit comb, which is generally divided into 3mm, 6mm, 9mm, 12mm, and longer ones. Choose the right gear according to the length you want to cut.
5. Select the limit comb with 3mm length and install it on the electric push shears. (no matching electric push scissors can be purchased online.) choose a suitable venue, either outdoor or indoor, and prepare benches, towels, mirrors, waste newspapers and so on.
A rope is cut 1 meter at the first time, 1 meter at the second time, 1 meter at the third time, and 1 meter at the fourth time.
The rope used to be 33 meters long. The rope length before the sixth cut is 1 / (1-34) = 4 (m). The rope length before the fourth shearing is (4: 1) / (1-23) = 15 (m). The rope length before the second shearing is (15.1) / (1-12) = 32 (m). The original length of the rope was 32 "1" 33 meters.
2. Reverse deduction. The sixth time you cut off the remaining 3amp 4, there is still 1x4x4m left, which is 1m, then it is 1x4m before cutting. If one meter is cut off for the fifth time, it will be 1m, 4m and 5m before it is cut. For the fourth time, the remaining 2amp 3 is cut, and there is still one beat 3, which is 5 meters, then it is 5 × 3 meters 15 meters before cutting.
3. If you subtract 1 stroke and write more than 2 meters, write again: (Xmur1) × (1-1 racer 2)-1 minus 2 meters for the third time: (XMui 1) × (1-1 Uniqure 2)-1-2 for the fourth time. For the fifth time.
4. That's the remaining one for the sixth time, which means the sixth time is four meters. Plus the fifth time is 5 meters, that is, the remaining 1x3 on the fourth time, then the fourth time is 15 meters, plus the third time 1 meter is 16 meters, this is the second time 1 meter 2, then the second time is 32 meters, and the first time is 33 meters.
