I have a hairdresser, the real man card is not fast, what should I do?
1. If it's not bad, add some gas. Our family makes the electric push work a little bit if it doesn't work for a while. It works very well. Like sewing machine oil or something, put some oil on it, if it's not bad, it's blown at 9:00, so it works very well.
2. First of all, remove the blade of the electric haircut, as shown in the following picture. Then clean the hair on the blade with a toothbrush and wear thick gloves to prevent cuts, as shown in the following picture.
3, the method also cannot, first unload the blade of the electric fader, then square it on the oilstone, pour some salt water to grind, generally grind the blade easily after a few minutes. If you find it troublesome, you can take the electric fader blade to the repair shop to polish it.
What if the hairdresser is not happy?
1. It's not that the knife head is unhappy, it's time for you to apply oil to the knife head. There are two types of hair clipper lubricants: mineral oil and synthetic oil. The fully synthetic lubricating oil has excellent performance, clear and transparent, durable, tasteless and does not thicken in winter. Electric hair cutters should use fully synthetic hair clipper lubricants.
2. First of all, remove the blade of the electric haircut, as shown in the following picture. Then clean the hair on the blade with a toothbrush and wear thick gloves to prevent cuts, as shown in the following picture.
3. The fader for shaving is not fast. You can use a grinder or oilstone to grind. First of all, remove the fader blade, absorb the back of the fader blade with a strong magnet, grind the fader blade on the grinder or oilstone, and pay attention to keeping it vertical and flat when grinding. Don't try too hard. Generally speaking, it is more appropriate to use 3000 mesh of oilstone grinding.
4. When diluting, keep stirring, slowly add water or glycerin, carefully caking, if caking can be hot stirred to 80 that will disappear naturally. The electric hairdresser must pay attention to lubrication and maintenance. After cleaning, dry the knife head and drip the lubricating oil.
5. After the head of the electric push scissors is blunt, the most convenient way is to replace the original blade, you can also grind the blade with oil soaked in oil, you can also take the blade off and adjust the pressure, but it is not easy to grind it on smooth pig iron and then clean it with kerosene.
6. Hello! It can be ground, please choose a professional grindstone. I hope to adopt it.
What if the scissors are not fast?
1. The way to sharpen a tailor's scissors is as follows: just flatten the plane of the scissors. Be sure to grind horizontally into a horizontal plane. The knife face of the bevel must be sharpened according to the fixed angle of the bevel, otherwise the scissors will not be sharpened well.
2. Just grind it with the grindstone for a haircut. Grind the outer mouth of the hair scissors first, grind the outer mouth with oilstone at a 45-degree angle, and grind the outer mouth in the inner mouth after grinding, the inner mouth must be smooth, and the flatness must reach zero pole so that the scissors can be fast.
3 、 . First ask the seller to see if there is a more convenient way. The traditional way to restore the sharpness of scissors is to use a grinding wheel, or grindstone, with stone, or with metal.
The tooth scissors for haircut are no longer sharp, how can they be sharpened?
1. Many people know that grindstone can be used when the knife at home is not sharp. In fact, tooth scissors can also use grindstone. Open the tooth scissors as much as possible, and then rub them back and forth on the grindstone with your hands. Remember that the strength should be lighter.
2. First of all, remove the blade of the electric haircut, as shown in the following picture. Then clean the hair on the blade with a toothbrush and wear thick gloves to prevent cuts, as shown in the following picture.
3. It is estimated that it will be replaced by a new one. The scissors used for hairdressing are basically easy to use. It is very difficult for anyone to sharpen them well, and those who find professional sharpening knives will not sharpen them either. Special tools, or newly bought ones, need to rest assured.
4. Buy a piece of sandpaper with a grain size of 150 or 200 and lay it face down on the table. Cut the sandpaper into three pieces with scissors. You will find that every time you cut a piece of sandpaper, the scissors will become sharper. Method 3 is similar to the method of cutting glass bottles above. Slide the pin forward while cutting the pin with scissors.
Make your scissors sharp right away. Method: when scissors are unhappy, find some tin foil (usually you can accumulate some spare). You don't have to use new tin foil, the old one is fine. Fold the tin foil into 2-3 layers, then cut the tin foil with scissors, and you will find that the scissors have become sharp.
How to sharpen the scissors when they are not sharp?
Method 1: take a smooth, strong glass or soda bottle, or screwdriver, and place it in the middle of the scissors blade. In the process of sharpening scissors, the glass may be damaged or broken, so make sure you don't mind.
. First ask the seller to see if there is a more convenient way. The traditional way to restore the sharpness of scissors is to use a grinding wheel, or grindstone, with stone, or with metal.
Choose a fine grindstone or fine oil grindstone, and put the millstone on the side and sprinkle some water. 2Accord 7 scissors had better be able to turn over, the blade turned over outward, if not, do not turn. 3Red7 scissors bevel is at a horizontal angle to the grindstone, grind back and forth in the horizontal direction, hands should be stable.
The first thing is to find a suitable fine grindstone or fine oil grindstone. Its function is to sharpen the scissors. Put the millstone aside and sprinkle some water. Turn the scissors upside down so that the blade faces outward. If you can't meet this requirement, don't turn it over. The bevel of the scissors is at a horizontal angle with the grindstone and is ground back and forth in the horizontal direction.
The first way is to use the remaining toothpaste to sharpen the scissors, so that the scissors will be sharper. The second method is to put a porcelain bowl upside down on the table, sprinkle some salt on the bottom of the bowl, increase the friction, and then pour some water. The scissors can be rubbed repeatedly at the bottom of the bowl to make the scissors sharper.
