How to disassemble and assemble the knife head of the hairdresser
Hairdressers are mainly divided into wired electric push shears and rechargeable electric push shears, and the knife heads of these two kinds of hair clippers are disassembled and assembled in different ways.
Prepare a cross screwdriver and turn the hair clipper in reverse. You can see that there are two Phillips screws on the knife head. Use the screwdriver to remove the two Phillips screws respectively. Then the big knife head can be taken off. After taking down the big knife head, you can see the small knife head in the back, just take it down.
The method of disassembling and disassembling the knife head of the ox hairdresser is as follows: hold the electric push shears in the front of both hands, press the knife head downward with the thumbs of both hands, and then unload. Hold the electric push and cut back with both hands, which will replace the clasp at the bottom of the knife head in the space of the knife head.
Disconnect the power supply. When disassembling the knife head, pay attention to the position of the hand, both thumbs must press both ends of the knife head to balance the force, otherwise it is easy to press the knife head or even hurt yourself. Follow the steps above and gently push your thumbs forward to hear a click to make sure the knife head is open.
How to disassemble and assemble the baby hair clipper? When installing the knife head, first insert the positioning bar at the end of the knife head into the positioning slot of the clipper, and then press down the tool head, which can be installed.
The first step is to prepare a clean new knife head and press it to the head position with the thumb of your hand. The second step is to disassemble the old knife head, which can be removed by pressing it hard with your thumb. The third step is to install the new knife head and pay attention to the interface position of the head.
How to disassemble rechargeable electric push shears
Electric push shears to disassemble the fuselage: one thing to pay attention to is to cut off the power supply, in order to prevent accidentally touching the switch when removing the knife head and turning on the switch to accidentally hurt yourself, so the power supply must be cut off before removing the knife head. Pay attention to the position of the hand when removing the tool head.
If this one of the whole body wants to be disassembled, it has a screw at the back. Unscrew this screw for it, so it can be removed again, otherwise it won't be removed.
Remove the screw at the back first, then remove the knife head, there are two screws inside and then use a knife to pry open the outer package. Then remove the screws one by one and you can find the battery.
Remove the electric pusher and hold it tightly with both hands, then press two thumbs on both sides of its blade and push it forward. at this time, press it slightly with your index finger, and the blade will be removed, and finally use a matching small brush to clean it up.
Electric push-shear disassembly method: remove the battery, rotate the gear to 0, and exit the tool head. Screw out the motor with two screws and remove the shrapnel.
The shell is fixed with screws. Note that some screws are hidden under the sticker. On the other hand, most of the shells are hooked with plastic hooks, and it is necessary to use thin and flat tools to push open the hooks.
How to disassemble Belojia children's hair clipper?
How to disassemble and assemble the baby hair clipper? When installing the knife head, first insert the positioning bar at the end of the knife head into the positioning slot of the clipper, and then press down the tool head, which can be installed.
It is convenient to trim more hairstyles for the baby. The baby barber can be cut and combed from top to bottom, and the hierarchical sense of both sides and feet can be easily cut out; you can easily trim the corners of the ears and trim the hair, and the bangs trimmed with a haircut block can make the hairstyle natural.
The method of disassembling and assembling the knife head of the hair clipper is as follows: hold the electric push shear in the front of both hands, press the knife head downward with the thumbs of both hands, and then unload. Hold the electric push and cut back with both hands, which will replace the clasp at the bottom of the knife head in the space of the knife head.
Hairdressers are mainly divided into wired electric push shears and rechargeable electric push shears, and the knife heads of these two kinds of hair clippers are disassembled and assembled in different ways.
First of all, the power of the fader hair clipper should be turned off to prevent accidentally touching the switch and accidentally injuring itself when removing the fader hairdresser to the knife head, so be sure to cut off the power supply before removing the knife head. When removing the tool head, you need to pay attention to the position of the hand.
Disconnect the power supply. When disassembling the knife head, pay attention to the position of the hand, both thumbs must press both ends of the knife head to balance the force, otherwise it is easy to press the knife head or even hurt yourself. Follow the steps above and gently push your thumbs forward to hear a click to make sure the knife head is open.
