How to repair the knife head of electric push shears if it doesn't turn?
Lack of power. Charge. The electric push shearing battery will stop automatically when it is fully charged with a protective device, and the battery will not break down after being charged for 24 hours.
Add lubricating oil to the blade. Change the blade. The use of electric fader: charging time. Just bought the electric hairdresser, you should pay attention to charge more than 12 hours, which is good for the battery. And if you do not use the barber for more than a month, you should charge the charger for more than 12 hours when you use it again.
This is an AC motor type electric push shear. It's heavy. The white one is the drive rod. I don't know if the motor works when you turn it on. If the motor works but the drive rod does not work, it is not installed or a small part is damaged.
The main results are as follows: (1) when the electromagnetic vibrating electric push shear produces greater vibration and noise, the Yuanbao-shaped screw is loosened and the fault is expected to be eliminated. In addition, need to check the tightness of the pressure blade screw, the screw is too loose, easy to produce vibration and noise, and can not cut the hair. The screw is too tight to quiver easily.
This is I think you see if it is because the wire inside is broken, if there is no normal wire line inside, if there is a problem, then it still cannot carry out a normal activity, and it is a kind of fault.
What if the electric hair clipper can't work?
The hair clipper should be cleaned frequently and maintained with lubricating oil, otherwise the knife head will rust and clip your hair. Electric hair clipper must pay attention to maintenance, to put it simply: cleaning + drying + dripping oil.
Lack of power. Charge. The electric push shearing battery will stop automatically when it is fully charged with a protective device, and the battery will not break down after being charged for 24 hours.
(1) if the use time is too long and exceeds the allowable range, the new coil should be replaced and the use conditions should be improved. (2) the armature is run over to death under long-term power supply. The head should be cleaned or the armature should be adjusted. (3) the internal turn-to-turn short circuit is caused by the aging insulation or vibration of the coil. The new coil should be replaced and secured.
This is an AC motor type electric push shear. It's heavy. The white one is the drive rod. I don't know if the motor works when you turn it on. If the motor works but the drive rod does not work, it is not installed or a small part is damaged.
Maintenance of the knife head: the children's hair clipper used in the family is basically waterproof. Remove the knife head after the baby's haircut, clean the broken dandruff along the direction of the blade with a small brush attached at random, and then wash the knife head with water. Be sure to dry it to prevent rust after cleaning.
It should be that there are too many broken hair accumulated between the blades, hindering the operation of the electric push head, so the electric hairdresser keeps cutting hair. Solution: prepare tools, brushes and pry pieces. Observe the layout of the push head of the electric push, it is generally like this.
Feilong barber scissors turn on the switch when charging and use the indicator light not to turn on the motor.
The fault is mainly caused by the damage of the charging circuit. Because the indicator light is not on, it is most likely that the power switch fails or the solder joint or connection of the charging circuit is broken. You should first check whether the solder joint and connection wire on the printed circuit board are detached, and whether the components are charred or broken.
The battery voltage in the electric razor is too low. Maintenance method: measure the battery voltage of the electric razor and replace the battery if the voltage is too low. Bad contact of AC / DC razor power plug. Maintenance method: check whether there is a voltage in the power supply part with a multimeter and plug it in.
There are two reasons why the razor does not turn, one is that the battery is losing power, and the other is that the brush in the motor is worn off. The situation of battery loss can be divided into two types: one is the problem with the charging circuit. If the power indicator is not on, it means that the charging circuit is broken. Its main performance is to turn on the razor switch and stop.
This shows that the motor commutator has impurities, you can turn on the motor to remove it; if there is a sense of obstruction in one direction when turning with your hand, then the motor commutator is worn out and generally can not be repaired.
The power connection of the charging plug is broken, so the charging light of the power supply is not on, and the weak rotation of the motor is the function of the remaining electric energy.
The head of the electric push scissors is not moving.
The electric fader does not move there are two ways to deal with it: add lubricating oil to the blade. Change the blade. The use of electric fader: charging time. Just bought the electric hairdresser, you should pay attention to charge more than 12 hours, which is good for the battery.
This is an AC motor type electric push shear. It's heavy. The white one is the drive rod. I don't know if the motor works when you turn it on. If the motor works but the drive rod does not work, it is not installed or a small part is damaged.
The reasons for the normal operation of the hair pusher are as follows: first of all, the blade is not in place or the screw is loose, which requires appropriate adjustment to cut the hair. Secondly, the blade is rusty and dull due to lack of oil. In particular, if there is rust between the teeth of the two blades, it will hinder the movement of the hair, and of course you can't cut your hair.
Either the coil is burned or the connection between the power cord and the coil is broken. Or maybe the switch is broken.
What is the reason why the electric push-shearing hairdresser is turned on but can't move?
1. Lack of power, charge. The electric push shearing battery will stop automatically when it is fully charged with a protective device, and the battery will not break down after being charged for 24 hours.
2, push hair fader normal operation can not push the head for the following reasons: first of all, the blade is not installed in place or the screw is loose, the hair needs to be properly adjusted. Secondly, the blade is rusty and dull due to lack of oil. In particular, if there is rust between the teeth of the two blades, it will hinder the movement of the hair, and of course you can't cut your hair.
In this case, you can first look at the product manual to see if it is because you can't operate it. If there is no problem with the operation, or can not be used, then it is necessary to contact the seller's after-sales customer service consultation.
4. V city electricity generally uses more suction bags, and the noise is relatively large. The working principle is that the electromagnet is powered on and off, and its power is mainly from the source and the wire package.
5. First of all, it is necessary to understand that there are many reasons why the knife head does not move. If you are rechargeable, it may be the dead point of the motor; there is no power (battery failure, circuit board failure); the eccentric wheel falls off or breaks and the eccentric wheel may slip. If it is alternating current electromagnetic type, it may be that the blade load is too large and is crushed to death; the coil is broken; the blade is rusty.
6. There are several possibilities as follows: first, the charger is damaged or has poor contact with the charging hole of the electric scissors and fails to charge the scissors; second, the starting switch of the scissors is not in good contact or the contact resistance is too large to start; third, the rechargeable battery cannot be recharged due to its complete failure.
What's going on when the barber's razor doesn't turn?
1. The possible reasons and solutions for the failure of the electric razor are as follows: the battery voltage in the electric razor is too low. Maintenance method: measure the battery voltage of the electric razor and replace the battery if the voltage is too low. Bad contact of AC / DC razor power plug.
2. First of all, it is necessary to understand that there are many reasons why the knife head does not move. If you are rechargeable, it may be the dead point of the motor; there is no power (battery failure, circuit board failure); the eccentric wheel falls off or breaks and the eccentric wheel may slip. If it is alternating current electromagnetic type, it may be that the blade load is too large and is crushed to death; the coil is broken; the blade is rusty.
3. Lack of power, charge. The electric push shearing battery will stop automatically when it is fully charged with a protective device, and the battery will not break down after being charged for 24 hours.
4. The battery is dead, there is a problem with the circuit contact inside, and there is something dirty in the knife head that has stuck in other situations. If you know a little bit, you can open it yourself.
5. Coil heating and burnout (1) if the use time is too long, if it exceeds the allowable range, the new coil should be replaced and the use conditions should be improved. (2) the armature is run over to death under long-term power supply. The head should be cleaned or the armature should be adjusted. (3) the internal turn-to-turn short circuit is caused by the aging insulation or vibration of the coil. The new coil should be replaced and secured.
6. If it is a low voltage mute or even a charging fader, if the motor turns, there is vibration, and the knife plate does not move, there is something wrong with the knife plate pick or eccentric shaft sleeve, set the tooth height adjustment ring to the maximum, peel off the knife head, and check whether there is a gap between the plastic parallel guide grooves on the back of the knife head, if there is a scrapped and replaced knife head.
